Powerware 9155 User Manual page 73

Table 12. Menu Map for Display Functions
Main Menu
UPS Status
Event Log
Measurements
Control
Settings g
Identification
Turn UPS ON/OFF
Powerware 9155 UPS (8–15 kVA) User's Guide
®
The following table shows the basic menu structure.
Submenu
Output
Battery
Input
Bypass
Go to Bypass Mode
Start Battery Test
Display Test
User Settings
Service Settings
ON and OFF Options
164201553 Rev D www.powerware.com
S
Display Information or Menu Function
UPS off / System normal / UPS supporting load / UPS
on battery / UPS on bypass / Active alarm list /
Battery status
Displays up to 100 events and alarms
L-N and L-L / Current / Frequency / Power
Voltage / Current / Runtime
L-N and L-L / Current / Frequency
L-N and L-L / Frequency
Forces the UPS to go to Bypass
When this command is active, the option changes to
Go to Normal Mode.
Initiates a battery test
Four different selectable tests for the front panel
functions: the LEDs cycle through, the alarm beep
sounds, the backlight turns off and on, and the
pixels scroll through to test the LCD.
See Table 13 for detail.
This screen is password-protected.
UPS Type / Part Number / Serial Number /
Firmware / Display / CAN Bridge
Operation
67