Powerware 9155 User Manual page 23

Powerware 9155 UPS (8–15 kVA) User's Guide
®
Battery
Connector
UPS Wiring
Access Cover
Conduit Landing
6. Remove the UPS wiring access cover and retain (see Figure 5).
7. Hardwire the input (TB1-1 through TB1-5) and output (TB1-6
through TB1-9) terminations for the UPS.
See Table 2 for specifications and Figure 6 for a detailed view of
the UPS terminal block.
164201553 Rev D www.powerware.com
S
Figure 5. UPS Rear View
UPS Only Installation
ON
OFF
Battery Circuit Breaker
17