Table of Contents
Advertisement
INTRODUCTION
NAVIGATION
Installation
The installation menu contains all the necessary items for testing the TravelPilot
E and preparing it for operation.
Switching the speed signal on/off
(only TravelPilot E
The Travelpilot E
and
without a speed signal. To change the setting, please proceed as follows:
1 Switch off the ignition and turn on the device using button 3.
2 Press and hold down the menu button ? for longer than 2 seconds.
The installation menu is displayed.
3 Mark and confirm the SPEED menu item.
The settings menu for the speed signal is displayed.
4 Mark and confirm the ON menu item for navigation with the speed signal or
the OFF menu item for navigation without the speed signal.
The installation menu is displayed.
After changing the setting, you can continue with the installation test in Point 3.
Installation test
The installation test allows you to check whether the system is correctly receiv-
ing signals from the sensors.
Note: The test must be carried out with the ignition switched off.
1 Switch off the ignition and turn on the device using button 3.
Note: If necessary, enter the numerical code.
2 Press and hold down the MENU button ? for longer than 2 seconds.
RADIO
and
)
give you the option of navigating with or
CD / MP3
CD CHANGER
TMC
TMC
SETUP
APPENDIX
ins=all
INST. TEST
AUTO CALIB
MAN. CALIB
SPEED
SPEED
ON
OFF
90
NAV
NAV
Hide quick links:
Advertisement
Table of Contents
