Scanning Receivable Stations (Scan); Traffic Information - Blaupunkt TRAVELPILOT FREESTYLER Operating And Installation Manual

Scanning receivable stations (SCAN)

You can briefly play (scan) all the receivable stations. The scanning time is 10
seconds.
Starting SCAN
1 Press and hold down the OK button ; for longer than 2 seconds.
Scanning begins. SCAN appears briefly in the display followed by the current
station name or frequency.
Stopping SCAN and continuing listening to a station
1 Press the ESC button =.
Scanning is stopped and the station that was tuned into last will remain ac-
tive.

Traffic information

Your device is equipped with an RDS-EON receiver. EON stands for Enhanced
Other Network.
Whenever a traffic announcement (TA) is transmitted, the system switches au-
tomatically from a station that does not provide traffic reports to the appropriate
traffic information station within the broadcasting network that does.
Once the traffic report has been played, the system will switch back to the pro-
gramme that you were listening to before.
Note: You can set the volume level at which traffic announcements
are played. To do so, read the section entitled "Configuring the pow-
er-on / navigation / traffic announcement / telephone volume and
GALA settings" in the "Setup – basic settings" chapter.
INTRODUCTION NAVIGATION RADIO CD / MP3
FM1 SCAN
NDR2
NJOY
RAD2
CD CHANGER SETUP
ffn
Ante
NAV
JUMP
55
APPENDIX