Defining route options
You can customise the route to suit your requirements at any time, even during
an active navigation session.
The configurable parameters are:
DYNAMIC: Dynamic navigation with TMC.
FAST: The system calculates a time-optimised route.
SHORT: The system calculates a distance-optimised route.
OPTIMUM: The system calculates a route that is both time and distance opti-
mised.
Plus Point: The OPTIMUM route option calculates a route using a fixed rela-
tionship between time-optimised and distance-optimised route calculations.
This is comparable to the route that a driver would give you who knows the
area well.
Furthermore, the TravelPilot E
route yourself (relationship between fast route and short route). For further
information, read the section entitled "Configuring the optimum route" in the
"Setup – basic settings" chapter.
FREEWAY: Here you can specify whether you want to drive on motorways
during the navigation session.
TOLL RoaD: You have the option of excluding roads for which toll charges
are levied from your navigation sessions or you can include them.
FERRY: You have the option of allowing the system to use ferries or avoid
them.
Note: If, for instance, you deactivated the motorway option and a
very long detour would be the result of applying this option, the
TravelPilot E will instead decide to include motorways in its route
calculations. The same applies to ferries and toll roads.
INTRODUCTION
NAVIGATION
allows you to configure the optimum
RADIO
CD / MP3
CD CHANGER
SETUP
47
APPENDIX