Setting The Day/Night Display Brightness And Contrast - Blaupunkt TRAVELPILOT FREESTYLER Operating And Installation Manual

3 Mark and confirm the menu item that you want to adjust.
The selection menu or the scale for adjusting the setting is displayed.
4 Select the setting using the menu knob :.
5 Press the OK button ; or the ESC button = to accept the setting.
The radio menu appears in the display again.
6 Press the ESC button = twice to close the radio menu.

Setting the day/night display brightness and contrast

You can adjust the display brightness separately for day (when vehicle lights
are off) and night (when vehicle lights are on) to suit your preferences. Further-
more, you can change the contrast of the display.
To adjust the display settings,
1 press the MENU button ?.
The setup menu appears in the display.
2 Mark and confirm the DISPLAY menu item.
The display menu appears in the display.
3 Mark and confirm the menu item that you want to adjust.
The scale for adjusting the setting is displayed.
Note: When setting the display brightness (DIMMING), the system
differentiates between whether daytime mode (lights off) or night-
time mode (lights on) is active. The setting changes that you make
only affect the currently active mode.
INTRODUCTION NAVIGATION RADIO CD / MP3
radio
RDS
RDS NAME
TMC
REGIONAL
HICUT
rdS
ON
OFF
TMC
SE==INGS
NAVI
DISPLAY
TMC
LANGUAGE
CLOCK
DisplaX
DIMMING
CONTRAST
TMC
CD CHANGER SETUP
NAV
NAV
NAV
NAV
83
APPENDIX