Displaying The Route List; Traffic Announcements During Navigation - Blaupunkt TRAVELPILOT FREESTYLER Operating And Installation Manual

Displaying the route list

You can display the route list that was calculated by the navigation system. The
route list is updated during the journey, and the route sections that you have not
yet driven down are displayed.
1 Press and hold down the
navigation session.
The calculated route list is displayed.
2 You can browse through the list by turning the menu knob :.
If you want to close the list,
1 press the ESC button =.
The navigation session display appears again.

Traffic announcements during navigation

You can switch traffic announcement standby during navigation on or off.
1 Press the TRAF button @.
The TA function is activated or deactivated. If you activated the TA function,
the symbol appears in the display.
INTRODUCTION NAVIGATION
button < for longer than 2 seconds during a
RADIO
TMC
FM1
TMC
CD / MP3 CD CHANGER
0/177 MI
65O yd
B1, KAISER
STRASSE
NDR 2
10 16 16mi
pm
B6, WESTSC
HNELLWEG
SETUP APPENDIX
NAV
NAV
49