Blaupunkt TRAVELPILOT FREESTYLER Operating And Installation Manual page 45

3 Mark and confirm the TMC AUTO menu item.
4 Mark the ON menu item and press the OK button ;.
5 Press the ESC button = twice to return to navigation mode.
Tuning into TMC stations manually
To tune into a TMC station manually, proceed as follows:
button 7 or the
1 Press the
The radio tunes into the next receivable station. If it is a TMC station, the
TMC symbol appears on the display. If not, start seek tuning again.
Reading TMC messages
The TravelPilot E provides you with the option of displaying the traffic messages
received via TMC (Traffic Message Channel).
1 Press and hold down the TRAF button @ for longer than 2 seconds.
The TMC messages are displayed sorted according to road numbers. If no
messages are stored in memory, an appropriate notice will be displayed.
2 Turn the menu knob : to browse through the list of available messages.
If a message is longer than the display area can accommodate,
button <.
1 press the
2 Turn the menu knob : to scroll through the message.
3 Press the ESC button = to return to the list.
Note: To ensure that only the data that are relevant to your current
vehicle position are used, the TMC function only processes TMC
messages relating to an area within a radius of approx. 60 miles
(100 km) around your vehicle position.
INTRODUCTION NAVIGATION
button 8.
RADIO CD / MP3
radio
TMC AUTO
SEEK
TMC
=MC aU=O
ON
OFF
TMC
=MC
A7 Hannove
r Hamburg
TMC
accident b
etween MJ
=MC
r Hamburg
accident b
TMC
etween MJ
Schwarmst
CD CHANGER SETUP
NAV
NAV
1/2
NAV
1/2
NAV
45
APPENDIX