Bypassing A Traffic Jam During Navigation - Blaupunkt TRAVELPILOT FREESTYLER Operating And Installation Manual

INTRODUCTION NAVIGATION

Bypassing a traffic jam during navigation

Alongside the ability to automatically bypass traffic jams with the aid of the dy-
namic navigation feature, the TravelPilot E also gives you the option of manually
entering traffic jams or blocked sections of road during an active navigation ses-
sion.
To bypass a traffic jam, proceed as follows:
1 Press and hold down the NAV button 1 for longer than 2 seconds.
A selection menu appears in the display.
2 Mark and confirm the TRAFFic JAM menu item.
The traffic jam menu appears in the display.
3 Turn the menu knob : to set the distance to the end of the traffic jam rela-
tive to your current position.
4 Press the OK button ;.
5 Press the ESC button =.
The navigation session display appears again and the route is recalculated.
Note: If necessary, the system will ask you to insert the navigation
CD-ROM.
Cancelling the traffic jam bypass feature
1 Press and hold down the NAV button 1 for longer than 2 seconds.
A selection menu appears in the display.
2 Mark and confirm the TRAFFic JAM menu item.
A query appears in the display.
3 If you want to cancel the traffic jam bypass feature, press the OK button ;.
4 Press the ESC button =.
The navigation session display appears again and the route is recalculated.
RADIO CD / MP3 CD CHANGER SETUP
NAVI
TRAFF. JAM
ROUTE OPTI
TMC
=RAFF> JAM
DISTANCE
TMC
3,27
=RAFF> JAM
CANCEL
TRAFFIC
TMC
JAM?
APPENDIX
46
NAV
NAV
mi
NAV