Table of Contents
Advertisement
Figure 3-12
Table 3-10
describes the Storage field options.
Table 3-10
Field
OVERWRITE
FORMAT
VIDEO DELETE
DELETE VIDEO
AFTER
SAVE SETUP
TO A USB
LOAD SETUP
FROM A USB
Saving Setup
To preserve the setup values that you have selected, open the SAVE SETUP screen, then
select CONFIRM and then press SEL.
This completes your DVR setup. Proceed to
information on live viewing, searching for video, and archiving.
Rev 3.01
Storage Setup Screen
Storage Setup Fields
Description
When enabled, the DVR continues recording and overwrites the oldest
existing recorded data after the hard drive is full.
When disabled, recording stops after the hard drive is full.
Formats the hard drive. Use the LEFT and RIGHT arrow buttons to
select ON, then press SEL. You then have the option to CANCEL or
CONFIRM.
Caution
All recorded data will be lost. We recommend that you
archive any data that you may need in the future before you format the
hard drive.
When enabled, the DVR deletes recorded video after the time that is
set in the DELETE VIDEO AFTER field.
When disabled, the DVR does not delete recorded video until the hard
drive has filled up.
Sets the amount of time that the DVR keeps video before deleting it.
Set the time between 1 and 60 Days. VIDEO DELETE must be enabled
for the video to delete after this date.
Press SEL to save your current DVR settings as a configuration file to a
connected USB memory stick.
Press SEL to load a configuration file containing DVR settings from a
connected USB memory stick.
Chapter 4, Front Panel Operation
24
for
Document 900.0399
08/08
Advertisement
Table of Contents
