Table of Contents
Advertisement
The DVR converts analog NTSC or PAL video to digital images and records them on one
hard drive. You can access recorded video from the hard drive or previously archived video
from a USB stick. You can watch live video while simultaneously recording.
The Remote Access Software allows the administrator to remotely connect to and monitor
up to 512 networked DVRs. The software logs the operational and sensor status of sites
once a day for later analysis. The software lets you search based on time and retrieve video
clips from remote sites.
Important Safeguards
1.
Read Instructions
All safety and operating instructions should be read before the appliance is operated.
2.
Retain Instructions
The safety and operating instructions should be retained for future reference.
3.
Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol
cleaners. Use a damp soft cloth for cleaning.
4.
Attachments
Never add any attachments and/or equipment without manufacturer approval as such
additions may result in the risk of fire, electric shock, or other personal injury.
5.
Water and/or Moisture
Do not use this equipment near water or in contact with water.
6.
Accessories
Do not place this equipment on an unstable cart, stand, or table. The equipment may
fall, causing serious injury to a child or adult, and serious damage to the equipment.
Wall- or shelf-mounting should follow the manufacturer's instructions, and should use
a mounting kit approved by the manufacturer.
Move this equipment and cart combination with care. Quick stops, excessive force,
and uneven surfaces may cause the equipment and cart combination to overturn.
7.
Power Sources
This equipment should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power, please consult your
equipment dealer or local power company.
If you are having problems with your power supply and need to replace it, contact
Honeywell (see the back cover for contact information) and order the HRDE4x4 DVR
power supply, model number HRDE4PS. Only use this power supply with your
HRDE4x4 DVR.
8.
Power Cords
Operator or installer must remove power, BNC, sensor, and other connections before
moving the equipment.
9.
Lightning
For added protection for this equipment during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the equipment
due to lightning and power-line surges.
Rev 3.01
2
Document 900.0399
08/08
Advertisement
Table of Contents
