Figure 6-20 Saving Flir Camera; Figure 6-21 Rtsp Settings; Adding Rtsp Cameras/Encoders - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6
Configuring the Cameras
8.
Figure 6-20

Adding RTSP Cameras/Encoders

Real Time Streaming Protocol (RTSP) is a control protocol for streaming video over the
Internet. It allows you to select the TCP or UDP based streaming modes depending upon what
the camera supports. For the camera type "Generic RTSP", you must specify the following
RTSP setting.
Figure 6-21
154
Click Save. A new FLIR series camera is added as shown below
Saving FLIR Camera
RTSP Settings
• Type the RTSP URL. Click
to different camera types.
(Figure
for help on RTSP URLs format that can be assigned
MAXPRO NVR 5.6 Installation and Configuration Guide
6-20).