Opening Ports; Select Program Folder; Ras Icon - Honeywell HRDE4X4 User Manual

6. Choose a language for the installation and click Next. The Select Program Folder
appears.
Figure 5-4
7. Click Next to use the default program folder, or manually select a folder from the list of
Existing Folders.
8. Wait a few minutes while the setup completes.
9. Double-click the RAS icon (see
launch the program.
Figure 5-5

Opening Ports

Note The default port for remote live view and playback on your DVR is 5445. To
remotely configure a DVR with the default port selected, you must also open
port 5455. If you change the default port number, the port you must open for
remote configuration is your new port number plus 10 (for example,
5455=5445+10).
When you connect one or more DVRs to a network through an IP sharing device, each
device must have a unique RTSP port number for remote access to each unit from outside
the LAN (Local Area Network). Also, the IP sharing device must be configured for port
forwarding so that each port, when accessed on the IP sharing device, will forward to the
appropriate DVR.
Note This port number is listed next to the PORT menu option in the Network
Setup screen (see
within the same LAN, the RTSP port does not have to be changed.
Rev 3.01

Select Program Folder

Figure 5-5) that should now be on your desktop to

RAS Icon

Figure 3-10). If you plan to access the DVR units only from
39 Document 900.0399
08/08