Table of Contents
Advertisement
Figure 3-10
Follow
Table 3-8
to set your system network parameters.
Table 3-8
Field
PORT
REMOTE ACCESS
BANDWIDTH
SAVING
NETWORK TYPE
DDNS
DDNS SERVER
NAME
SEND E-MAIL
Ports
Note
The default port for remote live view and playback on your DVR is 5445. To
remotely configure a DVR with the default port selected, you must also open
port 5455. If you change the default port number, the port you must open for
remote configuration is your new port number plus 10 (for example,
5455=5445+10).
When you connect one or more DVRs to a network through an IP sharing device, each
device must have a unique RTSP port number for remote access to each unit from outside
the LAN (Local Area Network). Also, the IP sharing device must be configured for port
Rev 3.01
Network Setup Screen
Network Setup Fields
Description
Press SEL to enter the port number (see
Enables/disables remote access (through RAS).
Enables/disables key frame transmission only. This feature is
useful when your network bandwidth is not enough for live video
streaming.
Sets the type of network connection. Options are:
LAN, DHCP, ADSL
Note
Other parts of the Network Setup screen change
depending on what network type you select (see
Types, page 22).
Enables/disables the DDNS server.
Enters or edits the DDNS server name.
Note
This option only appears if DDNS is enabled.
Sets up sending e-mail reports. This menu item takes you to the
Send E-mail setup screen. Enter the appropriate e-mail address
and server information to enable sending e-mail reports. See
for Sending E-Mail Alerts and
information.
Reports, page 23, for more
21
Ports
below).
Network
Document 900.0399
Setup
08/08
Advertisement
Table of Contents
