Disk Menu; Record Menu Settings - Honeywell HRDE4X4 User Manual

Note Live video can only be recorded to the local PC while the Viewer software is
connected to the remote digital video recorder and in Live view mode. The
settings in
Table 7-1
Setting Operation
Autorecord When a user connects remotely, the Local Rec button is automatically
enabled (RED) and video records to the local PC hard disk based on
settings in this Record menu.
Always If checked and the Local Rec button is enabled (RED) in live monitoring,
then live video from enabled channels is recorded to the local PC hard disk.
Event If checked and the Local Rec button is enabled (RED), then Live motion or
sensor events are recorded to the local PC hard disk.
Motion Records live motion events for the enabled channels, when checked.
Note
Alarm Records live sensor events for the enabled channels, when checked.
Duration Records post-event video for this length of time, when checked.
Channel Records enabled channels.
Note When there is motion in any one of the channels enabled for recording, all
selected channels will record when Local Record is clicked in the main RAS
Live View interface (see

Disk Menu

Click Disk on the left-hand panel of the Setup menu to access the Disk menu.
Figure 7-7
Rev 3.01
Table 7-1 affect how video is recorded.

Record Menu Settings

The HRDE4x4 dvr must be set up for Motion recording for the
associated cameras. Selecting Motion in this Setup menu does not
ensure that RAS will record locally to the PC when there is motion in
the selected channels.
Figure 6-1

Disk Menu

on page 41).
53 Document 900.0399
08/08