Saving A Server Address In A Profile - Honeywell MAXPRO Operator's Manual

L O G G I N G O N A N D F A M I L I A R I Z A T I O N
2
Logging on using Profiles
3.
4.
Note:
5.
Note:
6.
7.
S
AVING A
To save a server address
1.
2.
Figure 2-2
3.
4.
5.
6.
7.
Note:
20
Type your Username. The default user name is "Admin".
Type your Password. The default password is "trinity".
Select the Windows Logged-In User check box for logging on using the
Windows user name and password. If the Windows Logged-In User check box
is cleared, the MAXPRO NVR user name and password is used for authentication.
If there is no profile set as default, then select the Profile corresponding to the MAXPRO
NVR server to which you want to connect.
Set profiles if you have multiple MAXPRO NVRs and use the drop-down to
choose which NVR you would like to connect to.
Select the Display Video on Alarm check box to display the viewer as an alarm monitor.
Press ENTER or click . The Viewer tab displays.
S A
ERVER DDRESS IN A
In the client workstation, double-click
dialog box.
Click Server Settings. The Server Settings dialog box displays.
Server Settings dialog box
Click Add.
Type the Profile Name to identify the profile.
Type the Server IP/Name (numerical IP address or the network name of the MAXPRO
NVR server).
Click Save.
Click OK. The server address is saved in the profile.
You can click Set Default in the server settings dialog box to set the profile as the
default profile.
P
ROFILE
icon on the desktop to display the Log On
MAXPRO NVR Operator's Guide