Omniswitch 6450 Led Status - Alcatel-Lucent OmniSwitch 6450 User Manual

OmniSwitch 6450 Chassis and Hardware Components

OmniSwitch 6450 LED Status

LED
OK
PRI
PWR
STK
Stack/Uplink Ports
10/100/1000 Ports
SFP Ports
OmniSwitch 6450 Hardware Users Guide
State
Solid Green
Blinking Green
Solid Amber
Solid Green
Solid Amber
Off
Solid Green
Solid Amber
Off
Solid Green
Solid Amber
Off
Solid / Blinking Green
Solid / Blinking Amber
Off
Solid Green
Blinking Green
Solid Amber
Blinking Amber
Off
Solid Green
Blinking Green
Off
July 2012
Description
The switch has passed hardware diagnostic tests and the
system software is operational
Normal diagnostics and/or Remote Config Load in progress
System fan failure or temperature threshold exceeded
Primary unit in a stack or standalone switch
Secondary unit in a stack
Switch is idle. (not primary or secondary)
P/S Normal Operation
P/S Present and Bad
P/S Not Present.
Unit in Stacking Mode
Unit in uplink mode
No expansion module present
Valid Uplink / Activity
Valid Stacking Link / Activity
No Link Detected
Valid Link
Transmitting or receiving packets in a link up state for non-
PoE
Valid PoE Link
Transmitting or receiving packets in a link up state for PoE
No Link Detected
Valid Link
Transmitting or receiving packets in a link up state
No Link Detected
OmniSwitch 6450 LED Status
page 2-23