How To Read This Manual - Roland CAMM-3 PNC-300 User Manual

This manual is organized in the following format. Please use it in the way that best matches your needs.
Part 1 Startup
Basic operation, and the procedures to follow when finished cutting are explained here. Please read this section if you are
using the PNC-300 for the first time.
Part 2 User's Reference
Usage of the PNC-300's functions, daily care, and an overview if instruction sets sent from the computer are explained
here.
Windows ® and Windows NT
countries.
i486 and Pentium are registered trademarks of Intel Corporation in the United States.
IBM is a registered trademark of International Business Corporation.
Copyright © 1994–2000 Roland DG Corporaion
i

How to Read This Manual

® are registered trademarks or trademarks of Microsoft ® Corporation in the United States and/or other