Application Migration - Intermec 700 Series User Manual

SECTION 3

Application Migration

" NOTE:
These instructions assume that the 700 Color Management Tools portion of the 700C Tools
CD was installed onto your desktop and that a storage card has been added to the base con-
figuration of the 700 Color Computer.
The following steps are required to ensure that the following will happen on a
cold-boot:
"
"
"
Do the following for the cold-boot procedure:
1. From your desktop, double-click the Intermec CE Imager desktop icon to
2. Click Default under Components List to activate the components.
3. Click (+) to expand the AutoRun System component, click (+) to expand
4. Click Install to install the AUTORUN files onto the storage card.
5. Create a "\Cabfiles" folder on the storage card. Copy any CAB files that
CAB files can be restored,
applications will automatically start,
and the registry will be restored.
access the Intermec CEImager application. If this icon is not on your
desktop, then double-click the CEIMAGER.EXE executable from the
"C:\Intermec\Intermec 700 Color Mgmt Tools\Tools\CEImager" folder.
the Destination Media option, then select either the CompactFlash
Card option or the SecureDigital Card option. Do not select both storage
cards, as the AutoRun files copied will work for one storage card, but not
work on the other storage card.
are to be extracted on every startup into this folder.
Installing Applications and Updating System Software
700 Series Color Mobile Computer User's Manual 3-9