Ftp Server - Intermec 700 Series User Manual

Programming

FTP Server

FTP support is provided through the FTP Server application FTPDCE.EXE (MS
Windows CE Versions) which is provided as part the base system.
FTPDCE is the Internet File Transfer Protocol (FTP) server process. The server
can be invoked from an application or command line. Besides servicing FTP cli-
ent requests the FTP Server also send a "network announcement" to notify pro-
spective clients of server availability.
Synopsis:
Options:
" NOTE:
Disabling the default account without providing a working access control list on the server will
result in a device that will not accept any FTP connections.
The File Transfer Protocol (FTP) server transfers files over TCP/IP networks.
The FTPDCE.EXE program is a version that does not display a window, but can
run in the background.
7-12 700 Series Color Mobile Computer User's Manual
ftpdce [ options ]
–Aaddr Sets the single target address to which to send the network
announcement. Default is broadcast.
–Bbyte Sets the FTP data block size. Smaller sizes may be useful
over slower links. Default is 16384.
–Cname Sets the device name. Used by Intermec management
software.
- Fvalue Disables the default Intermec account. A value of "0" disables
the account. Default is "1".
–Hsec Sets the interval between network announcements in seconds.
A value of "0" turns the network announcement off.
Default is 30 seconds.
–Iip Sets the preferred 6920 Communications Server. [optional]
–Llog Sets the state of logging. Default is 0 (disabled).
–Nsec Specifies the number of seconds to wait before starting FTP
server services.
–Pport Sets the UDP port on which the network announcement will
be sent. Default port is 52401.
–Qport Sets the port on which the FTP Server will listen for
connections. Default port is 21.
–Rdir Sets the FTP mount point to this directory. Default is the root
directory of the drive from which the FTP Server program was
executed.
–Tscript Sets the script name for the 6920 Communications Server to
process.
–Uurl Sets the default URL for this device.
–Z"parms" Sets extended parameters to be included in the network
announcement.
SECTION 7