Symbologies; Standard 2 Of - Intermec 700 Series User Manual

Control Panel Applets

Symbologies

You can change bar code symbology parameter settings in your 700 Series
Computer via the Data Collection control panel applet. The following
parameters are for bar code symbologies. Additional information about the more
common bar code symbologies are in Appendix C, "Bar Code Symbologies." Note
that these parameters are listed in the order of their appearance within this tab.
Most of these symbologies apply to both the imager and the laser scanner tools.
However, when using an imager, the Macro PDF (page A-16), Micro PDF 417
(page A-17), Matrix 2 of 5 (page A-19), Telepen (page A-20), and Code 11 (page
A-21) symbologies are not supported. Likewise, when using a laser scanner, the
QR Code (page A-22) and Datamatrix (page A-23) symbologies are not supported.
The following table shows which bar code symbologies are supported either by an
imager or by a laser scanner.
Bar Code Symbology
Code 39
Interleaved 2 of 5

Standard 2 of 5

Matrix 2 of 5
Code 128
Code 93
Codabar
MSI
Plessey
UPC
EAN/EAN 128
Code 11
PDF 417
Micro PDF 417
Telepen
Datamatrix
QR Code
A-4 700 Series Color Mobile Computer User's Manual
APPENDIX A
Laser
Imager Scanner
X X
X X
X X
X
X X
X X
X X
X
X
X X
X X
X
X X
X
X
X
X