Intermec 700 Series User Manual page 105

Network Support
Details
Below are descriptions and meanings for each piece of information provided via
the Details tab, reading from top to bottom. Most of this is similar to what is
shown under the General tab. The information applies to both the GSM/GPRS
and the CDMA/1xRTT radio modules unless otherwise indicated.
4-28 700 Series Color Mobile Computer User's Manual
Serial Status:
This indicates whether serial communications passed ("PASS") or failed
("FAIL") in its last transaction. A status of "FAIL" typically indicates that
the 700 Series Computer is unable to establish communication with the ra-
dio module installed within.
Manufacturer:
This lists the name of the manufacturer that developed this radio module,
such as "Xircom," "Siemens," or "Sierra Wireless."
Model:
This identifies the product name for this radio module, such as "SB555" or
"GM350X."
IMEI # (GSM/GPRS):
This is the IMEI (International Mobile station Equipment Identity) serial
number of the GSM/GPRS radio module.
RSSI:
This displays the RSSI frequency or lists "Unavailable" if there is no signal
or the signal cannot be retrieved from the radio module.
Operator:
This lists the name of the service providing the network support.
Band (CDMA/1xRTT):
This identifies the frequency bands used by this radio module.
IMEI # (GSM/GPRS):
This is the IMEI (International Mobile station Equipment Identity) serial
number of the GSM/GPRS radio module.
Radio Temp (CDMA/1xRTT):
This identifies the temperature of the radio module, or lists "Unavailable
degrees" if there is no information or the temperature cannot be measured.
Firmware Rev:
This identifies the firmware version, if available.
SECTION 4