Code 128 User Id; Codabar User Id - Intermec 700 Series User Manual

APPENDIX A
Code 39 User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify Code 39 bar code data. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:

Code 128 User ID

If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify Code 128 bar code data. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:

Codabar User ID

If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify Codabar bar code data. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
Tap (+) to expand the Symbology ID parameter, select the Code 39 user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.3.1
x where x is a single ASCII character. Default is asterisk (*).
Tap (+) to expand the Symbology ID parameter, select the Code 128 user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.5.1
x where x is a single ASCII character. Default is asterisk (*).
Tap (+) to expand the Symbology ID parameter, select the Codabar user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.2.1
x where x is a single ASCII character. Default is D.
700 Series Color Mobile Computer User's Manual
Control Panel Applets
A-25