Low Battery Shutdown; System Status Maintained - Intermec 700 Series User Manual

SECTION 1
You can also view the battery status for the 700 Series Computer by accessing
the Unit Information control panel applet. Tap the Unit Information icon,
then tap the Battery Status tab to view the current status. Tap ok to exit this
information.

Low Battery Shutdown

If your computer shuts down because of low battery conditions, your computer
will not operate. This is done to ensure that data is protected. Although the bat-
tery will protect the data against loss for several hours, you should connect your
computer to a power source when you first detect a low battery condition.
Your computer contains an internal super capacitor, a temporary power storage
device, that protects data for up to ten minutes. This is to give you time to re-
place the main battery pack before that data is lost. Be sure to put the computer
in a suspend mode before doing so.
The battery power fail level is set so that after the system shuts down in a low
battery condition, there is still sufficient charge to allow the unit to remain con-
figured, keep proper time, and maintain DRAM (Dynamic Random Access
Memory) for at least 72 hours at room temperature if the main battery remains
in the mobile computer. The configuration and time are lost if:
"
"
"

System Status Maintained

System status is maintained in "suspend" when the main battery is removed:
"
"
The battery discharges beyond this level.
The battery is removed when the computer is not in suspend mode.
A cold reset is performed on the computer.
10 minutes for 64 MB low-power chips
5 minutes for 128 MB low-power chips
700 Series Color Mobile Computer User's Manual
Introduction
1-3