Intermec 700 Series User Manual page 93

Network Support
Basic
Use the Basic page to set the network type, transmission rate, and radio channel
for this profile. Click OK to return to the Profiles page.
4-6 700 Series Color Mobile Computer User's Manual
Network type:
Tap the drop-down list to select either Infrastructure or Ad-hoc.
SSID (Network Name):
This assumes the profile name when Use Profile Name for SSID is
checked on the previous screen, unless another name is entered in this field.
If you want to connect to the next available network or are not familiar
with the network name, enter "ANY" in this field. Consult your LAN ad-
ministrator for network names.
TX Rate:
Tap the drop-down list to select the speed at which to transmit connections:
Fully Auto (default), 11 Mbps, 5.5 Mbps, 2 Mbps Auto, 2 Mbsp, or 1 Mbps.
Channel:
If "Ad-hoc" were selected as the network type, then this is enabled. Tap the
drop-down list to select a channel, from 1–15, through which to handle con-
nections (default is 3).
Enable Power Management:
Check this box to conserve battery power (default), or clear this box to dis-
able this feature.
SECTION 4