Is9Cconfig3 Functions; Iscp Commands; Imager Settings; Trigger Settings - Intermec 700 Series User Manual

SECTION 6

IS9CConfig3 Functions

The IS9CConfig3 interface provides generic methods for retrieving and setting
configuration using ISCP commands.

ISCP Commands

An ISCP Command is composed of three or more bytes formatted as
<SG><FID><parameters> where:
ISCP commands include the following:

Imager Settings

This dictates the start and end column positions for the image dimension.

Trigger Settings

This sets the duration of the aiming beam before acquiring images to be decoded.

QRCode Symbology

This enables or disables the QRCode symbology.

Datamatrix Symbology

This enables or disables the Datamatrix symbology.
SG Setup group.
FID Function ID.
parameters One or more configuration value bytes depending on the
configuration.
SG FID Parameter
0x7B 80 Value [0..639] Start column position.
0x7B 81 Value [0..639] End column position.
SG FID Parameter
0x70 81 Value [0..65535]
SG FID Parameter
0x55 40 0
0x55 40 1
SG FID Parameter
0x54 40 0
0x54 40 1
Description
Description
Number of milliseconds.
Description
Disable this symbology.
Enable this symbology.
Description
Disable this symbology.
Enable this symbology.
700 Series Color Mobile Computer User's Manual
Scanner Support
6-61