Intermec 700 Series User Manual page 80

SECTION 3
These instructions assume that Microsoft ActiveSync had been installed onto
your desktop computer and is up and running. If not, go to Section 2, "Pocket PC
2002," for an URL from which you can download the latest application. Use
Microsoft ActiveSync to update the bootloader in the Flash ROM on the 700 Se-
ries Computer as instructed below:
1. Connect your 700 Series Computer to your desktop computer via an Active-
2. Wait for a "Connected" message to appear in the Microsoft ActiveSync ap-
3. Click Explore to access the Mobile Device directory on your 700 Series
4. From your desktop, select Start → Windows Explorer to browse the
5. Within the Mobile Device directory, go to the root of the 700 Series Com-
6. From the 700 Series Computer, tap Start → Programs → File Explorer.
7. If the 700 Series Computer has a laser scanner and a
8. Copy any of the additional system files needed for your 700 Series
9. When all of the files are pasted, perform a cold-boot on the 700 Series Com-
After the update, you can remove the AUTOFLASH.NB0, EFLASH.EXE, or
EBOOT.NB0 file from the 700 Series Computer.
Sync cable or IrDA.
plication to signal a connection to the 700 Series Computer. If necessary,
select File → Get Connected to initiate a connection (see page 3-2).
Computer.
"C:\Intermec\Intermec 700 Color Mgmt Tools\Drive Images" directory.
Select to highlight the appropriate file, right-click the file for a pop-up
menu, then select Copy.
If you want to update both the bootloader and the operating system
"
image on your 700 Series Computer, then double-click the
"\AutoFlash" folder, and copy the AUTOFLASH.NB0 file.
If you want to update a particular region in your operating system,
"
then double-click the "\BinBackup" folder and copy the respective
.BIN file and the EFLASH.EXE executable file. See page 3-6 for
more information about EFlash.
To update just the bootloader, double-click the "\Eboot" folder and
"
copy the EBOOT.NB0 file.
puter, do a right-click for a pop-up menu, then select Paste.
Tap My Documents → My Device, then double-tap EFLASH.EXE to
execute the flash. Do not cold-boot the 700 Series Computer as instructed
via the Flash program.
S9CUPGRADEUTILITY.CAB file is in the "\Intermec 700 Color Mgmt
Tools\Cab Files\Programs" directory on the 700C Tools CD, you will need
to upgrade the scanner firmware. Copy this CAB file to the 700 Series
Computer, then extract this file. The S9CUpgradeUtility application will
start automatically. Tap Upgrade to initiate the process.
Computer (listed with their paths):
Base operating system files:
"
"C:\Intermec\Intermec 700 Color Mgmt Tools\Drive Images"
CAB files:
"
"C:\Intermec\Intermec 700 Color Mgmt Tools\Cab Files"
puter. When the computer reboots, wait for the LED on the top left of your
keypad to stop blinking. Tap Start → Programs → File Explorer to lo-
cate the newly copied executable files, then tap these files to activate their
utilities.
Installing Applications and Updating System Software
700 Series Color Mobile Computer User's Manual 3-5