Unit Manager
Set Time and Date
This command sets the date and time on the 700 Series Computer. The default
date and time is June 1, 1999 at 12:00 AM.
From the network, send the following:
/+ yyyymmddhhmmss
where acceptable values for the date are:
yyyy
mm
dd
hh
mm
ss
You can also set the time and date by using Configuration Management in Unit
Manager, or by using the Clock control panel applet in the Settings menu. To
access this control panel applet, tap Start → Settings → the System tab → the
Clock icon to access its control panel applet.
B-10
700 Series Color Mobile Computer User's Manual
0000–9999
Year
01–12
Month of the year
01–31
Day of the month
00–23
Hour
00–59
Minutes
00–59
Seconds
APPENDIX B