Intermec 700 Series User Manual page 110

SECTION 4
6. Press and hold the new connection for a pop-up menu, then tap Connect to
7. Use either the onscreen keyboard, or press the keys to type any of the AT
initiate the connection. Wait for about ten seconds for the Network Log On
screen, then tap OK. Note: You do not need to enter any information within
the Network Log On screen.
commands provided by Sierra Wireless. Press or tap Enter to send each
command. The results of each command sent will print onscreen — see the
sample illustration below. Note that each "AT" command must start with
either the "at" or "at+" characters.
To see what you typed onscreen, type "ate1" to initiate the AT Echo
"
command, then press Enter.
700 Series Color Mobile Computer User's Manual
Network Support
4-33