Data Collection; Symbologies - Intermec 700 Series User Manual

" " " " "
" NOTE:
Parameter information, such as SNMP OID and options, is detailed in Appendix A, "Control
Panel Applets."
Configuration parameters are also configurable using a Unit Manager applica-
tion which accesses the 700 Series Computer through a web browser on your
desktop PC via the SRDEVMGMT.CAB file.
To use the Unit Manager, install this CAB file from the 700C Software Tools CD-
ROM. See the Software Tools Help on the 700C Tools CD for assistance. See the
Unit Manager Help on the 700C Tools CD for information on using the Unit
Manager application.

Data Collection

Within the Unit Manager, click Configuration from the left navigation bar,
then click the Data Collection icon to access any of these tabs: Symbologies,
Symbology ID, Beeper/LED/Buttons, or Virtual Wedge.

Symbologies

Within the Unit Manager, select Configuration Management → Data Collec-
tion, then click the Symbologies tab to access the following parameters. Op-
tions for these parameters are listed on the page provided. These are listed in
alphabetical order.
"
"
"
"
"
"
"
"
"
" " " "
Codabar (page A-7)
Code 11 (page A-21)
Code 128 (page A-10)
Code 128 Options (page A-11)
"
Code 128 FNC1 Character (page A-12)
"
Code 39 (page A-5)
Code 93 (page A-9)
Code 93 Length (page A-9)
"
Datamatrix (page A-23)
Interleaved 2 of 5 (page A-18)
Matrix 2 of 5 (page A-19)
MSI (page A-14)
" " " " "
700 Series Color Mobile Computer User's Manual
Appendix B
Unit Manager
" " " " " "
B-1