Intermec 700 Series User Manual page 268

APPENDIX A
Datamatrix
A two-dimensional matrix symbology, which is made of square modules arranged
within a perimeter finder pattern. The symbology utilizes Error Checking and
Correcting (ECC) algorithm with selectable levels for data error recovery and Cy-
clic Redundancy Check algorithm to validate the data. The character set in-
cludes either 128 characters conforming to ISO 646 (ANSI X3.4 -- 1986) or 256
extended character set. Maximum capacity of a symbol is 2335 alphanumeric
characters, 1556 8-bit byte characters or 3116 numeric digits. Note that this is
not available when you use a laser scanner with your 700 Series Computer.
Action:
SNMP OID:
Options:
Tap (+) to expand the Datamatrix parameter, select the setting to be
changed, then tap an option to change this setting or select an option from
the drop-down list.
1.3.6.1.4.1.1963.15.3.3.1.1.34.1
Decoding 0 Not active
1 Active (default)
700 Series Color Mobile Computer User's Manual
Control Panel Applets
A-23