Intermec 700 Series User Manual page 92

SECTION 4 Network Support
To add a profile:
Tap Add, enter up to 32 alphanumeric characters to name this profile if
you have not already entered a description in the Profiles page, configure
the basic and security information for this profile, then click Done to con-
figure its basic and security information.
Leave Use Profile Name for SSID checked for the SSID to use this as-
signed profile name. If this is cleared (check mark removed), the SSID will
default to using the factory-assigned "INTERMEC" network name. Go to
page 4-6 to continue.
To edit a profile:
Select an existing profile from the Profile drop-down list, tap Edit, make
the changes needed for this profile (starting on page 4-6), then tap OK to
return to the Profiles page.
To delete a profile:
Select a profile from the Profile drop-down list, tap Delete, then tap Yes to
remove the selected profile.
700 Series Color Mobile Computer User's Manual 4-5