Copying To A Securedigital Storage Card; Updating The System Software; Updating With Microsoft Activesync - Intermec 700 Series User Manual

Installing Applications and Updating System Software
6. Add your application to the AUTOUSER.DAT file on the
7. Remove the CompactFlash drive from your desktop computer and reinstall
8. Warm-boot the 700 Series Computer to add these files to the CompactFlash
If the AUTOUSER.DAT file is found and the "RUN=" statement is correct, then
the task manager will launch and execute your program on startup.

Copying to a SecureDigital Storage Card

Do the same steps as for the CompactFlash storage Card, except replace the
"\Storage Card\2577" directory with the "\SDMMC Disk\2577" directory.

Updating the System Software

" NOTE:
Before performing this update, please ensure that the 700 Series Computer to be updated
has a fully charged battery. A power failure during the update will corrupt the computer flash,
thus the computer would not boot. You will have to send the 700 Series Computer to service
to recover the computer flash.
Use any of the following instructions to update your 700 Series Computer:
"
"

Updating with Microsoft ActiveSync

" NOTE:
These instructions assume that the 700 Color Management Tools portion of the 700 Series
Color (700C) Tools CD was installed onto your desktop.
The Microsoft ActiveSync tool is located on the 700C Companion CD, which con-
tains Microsoft products, such as Outlook and ActiveSync. See Section 2, "Pocket
PC 2002," for information about this tool as provided by Microsoft Corporation.
This can be a serial, USB, Ethernet, or 802.11b ActiveSync connection. Files can
then be copied using File Explorer on a PC or laptop computer. This option is
usually only good when updating a few 700 Series Computers.
The upgrade will install the latest version of bootloader and operating system.
To see what version is on your 700 Series Computer, tap Start → Internet Ex-
plorer → the Intermec logo.
3-4 700 Series Color Mobile Computer User's Manual
"\Storage Card\2577" directory that contains the following statement,
where your directory is the directory on the CompactFlash storage card
where the application was installed, and yourapp.exe is the name of your
application. Finish the "RUN=" statement with a carriage return linefeed
combination. There may be multiple run statements in the file.
RUN=\<your directory>\<yourapp.exe>
it into the 700 Series Computer.
storage card.
Microsoft ActiveSync
SecureDigital or CompactFlash storage card (page 3-6)
SECTION 3