Using The Ck30 With A Low Battery Condition - Intermec CK30 User Manual Addendum

4 Choose the function you want to disable from the Keypad
menu, select Disable from the function dialog box, and then
press Enter.
5 Exit the Configuration Utility.
To change the I key functionality
1 Press C and then B. The System Main Menu appears.
2 Select the Configuration Utility.
3 Select Device Settings > Keypad.
4 From the Keypad menu, select Configure Boot
Functionality.
5 Choose Warm Boot or Cold Boot and then press Enter.
6 Exit the Configuration Utility.

Using the CK30 With a Low Battery Condition

If the Battery light blinks or turns on solid, you cannot restore
factory defaults or perform a warm or cold boot on your CK30
using the I key. You must replace the battery with a fully
charged battery before you can restore factory defaults or boot
your CK30.
Note: This function is only available on CK30s with a PSC of
51 or higher. To find your PSC version, go to the System Main
Menu and choose Diagnostics > Hardware Diagnostics >
PSC Utility.
Removing the main battery when the backup battery low or
critically low icon displays in the status bar may cause your
CK30 to cold boot and you may lose data.
Attention: L'enlèvement de la batterie principale quand le
bas de secours de batterie ou les affichages en critique bas
d'icône dans la barre de statut peut causer votre CK30 à la
botte froide et de vous peut perdre des données.
CK30 Handheld Computer User's Manual Addendum 17