6.2 The IP Screen
Click Network > LAN to open the IP screen. See
background information. Use this screen to set the Local Area Network IP address
and subnet mask of your ZyXEL Device.
Figure 28 Network > LAN > IP
The following table describes the fields in this screen.
Table 21 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Reset
6.3 DHCP Server Screen
Use this screen to configure the DNS server information that the ZyXEL Device
sends to the DHCP client devices on the LAN.
Figure 29 Network > LAN > DHCP Server
FSG2200HNU User's Guide
DESCRIPTION
Enter the LAN IP address you want to assign to your ZyXEL Device in
dotted decimal notation, for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default). Do not change this field
unless you are instructed to do so.
Click this to save your changes back to the ZyXEL Device.
Click this to begin configuring this screen afresh.
Chapter 6 LAN Setup
Section 6.1 on page 93
for
95