Table of Contents
Advertisement
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
Check the hardware connections, and make sure the LEDs are behaving as
2
expected. See the Quick Start Guide.
Make sure your Internet browser does not block pop-up windows and has
3
JavaScripts and Java enabled. See
Reset the device to its factory defaults, and try to access the ZyXEL Device with
4
the default IP address. See
If the problem continues, contact the network administrator or vendor, or try one
5
of the advanced suggestions.
Advanced Suggestions
• Try to access the ZyXEL Device using another service, such as Telnet. If you can
access the ZyXEL Device, check the remote management settings and firewall
rules to find out why the ZyXEL Device does not respond to HTTP.
• If your computer is connected wirelessly, use a computer that is connected to a
LAN port.
I can see the Login screen, but I cannot log in to the ZyXEL Device.
Make sure you have entered the user name and password correctly. The default
1
user name is admin. These fields are case-sensitive, so make sure [Caps Lock] is
not on.
You cannot log in to the web configurator while someone is using Telnet to access
2
the ZyXEL Device. Log out of the ZyXEL Device in the other session, or ask the
person who is logged in to log out.
Turn the ZyXEL Device off and on.
3
If this does not work, you have to reset the device to its factory defaults. See
4
Section 24.2 on page
I cannot Telnet to the ZyXEL Device.
See the troubleshooting suggestions for
the web configurator.
FSG2200HNU User's Guide
I forgot the IP address for the ZyXEL Device.
Appendix C on page
Section 1.6 on page
235.
I cannot see or access the Login screen in
Ignore the suggestions about your browser.
Chapter 24 Troubleshooting
297.
27.
237
Advertisement
Table of Contents
