Table of Contents
Advertisement
on the ZyXEL Device (rom-0, name of the configuration file on the ZyXEL Device)
to the file destination on the computer and renames it config.rom.
Configuration Backup Using GUI-based TFTP Clients
The following table describes some of the fields that you may see in GUI-based
TFTP clients.
Table 78 General Commands for GUI-based TFTP Clients
COMMAN
D
Host
Send/
Fetch
Local File
Remote
File
Binary
Abort
Refer to
Section 21.1.2 on page 217
TFTP and FTP over WAN.
FSG2200HNU User's Guide
DESCRIPTION
Enter the IP address of the ZyXEL Device. 192.168.1.1 is the ZyXEL Device's
default IP address when shipped.
Use "Send" to upload the file to the ZyXEL Device and "Fetch" to back up the
file on your computer.
Enter the path and name of the firmware file (*.bin extension) or
configuration file (*.rom extension) on your computer.
This is the filename on the ZyXEL Device. The filename for the firmware is
"ras" and for the configuration file, is "rom-0".
Transfer the file in binary mode.
Stop transfer of the file.
to read about configurations that disallow
Chapter 21 Tools
229
Advertisement
Table of Contents
