Table of Contents
Advertisement
Chapter 7 Wireless LAN
Table 25 Network > Wireless LAN > General (continued)
LABEL
A-MPDU
Aggregation
Channel
Width
Apply
Reset
7.3 The Security Screens
Use this screen to set up wireless security of your ZyXEL Device. Click Network >
Wireless LAN > Security to open the following screen. The screen varies
depending on the wireless security you select.
Figure 36 Network > Wireless LAN > Security
110
DESCRIPTION
This field displays only when you select 802.11b/g/n or 802.11n only
in 2.4G band in the Mode Select field.
Check this to allow the grouping of several A-MSDUs (Aggregate MAC
Service Data Units) into one large A-MPDU (Aggregate MAC Protocol Data
Unit). This function allows faster data transfer rates.
This field displays only when you select 802.11b/g/n or 802.11n only
in 2.4G band in the Mode Select field.
A standard 20MHz channel offers transfer speeds of up to 150Mbps
whereas a 40MHz channel uses two standard channels and offers speeds
of up to 300Mbps. However, not all devices support 40MHz channels.
Select the channel bandwidth you want to use for your wireless network.
It is recommended that you select 20/40 (20/40 MHz). This allows the
ZyXEL Device to adjust the channel bandwidth depending on network
conditions.
Select 20 MHz if you want to lessen radio interference with other wireless
devices in your neighborhood.
Click this to save your changes back to the ZyXEL Device.
Click this to reload the previous configuration for this screen.
FSG2200HNU User's Guide
Advertisement
Table of Contents
