Chapter 24 Troubleshooting
In the next example, phone port 1 is configured to use SIP account 1 and phone
port 2 is configured to use SIP account 2 for incoming calls. In this case, every
time you receive a call from your SIP account 1, the phone connected to phone
port 1 rings. Similarly, every time you receive a call from your SIP account 2,
phone port 2 rings. To apply these configuration changes you need to configure
the Analog Phone screen. See
Figure 109 Incoming Calls: Individual Configuration
PHONE 1
PHONE 2
24.7 USB Device Connection
The ZyXEL Device fails to detect my USB device.
Make sure your USB device is formatted using FAT32.
1
Disconnect the USB device.
2
Reboot the ZyXEL Device.
3
If you are connecting a USB hard drive that comes with an external power supply,
4
make sure it is connected to an appropriate power source that is on.
Re-connect your USB device to the ZyXEL Device.
5
242
Section 9.4 on page
144.
SIP 1
SIP 2
FSG2200HNU User's Guide