Table of Contents
Advertisement
Click Network > Wireless LAN > QoS. The following screen displays.
Figure 41 Network > Wireless LAN > QoS
The following table describes the labels in this screen.
Table 30 Network > Wireless LAN > QoS
LABEL
Enable WMM of
SSID1~4
Enable WMM
Automatic
Power Save
Deliver (APSD)
Apply
7.5 WPS
Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.
WPS allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Set up each WPS connection
between two devices. Both devices must support WPS. See
307
for more information about WPS.
Note: The ZyXEL Device applies the security settings of the SSID1 profile (see
Section 7.2 on page
have set the security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security.
FSG2200HNU User's Guide
DESCRIPTION
Check this to have the ZyXEL Device automatically give a service a
priority level according to the ToS value in the IP header of packets it
sends. WMM QoS (Wifi MultiMedia Quality of Service) gives high priority
to voice and video, which makes them run more smoothly.
Click this to increase battery life for battery-powered wireless clients.
APSD uses a longer beacon interval when transmitting traffic that does
not require a short packet exchange interval.
Click this to save your changes back to the ZyXEL Device.
107). If you want to use the WPS feature, make sure you
Chapter 7 Wireless LAN
Appendix D on page
117
Advertisement
Table of Contents
