Table of Contents
Advertisement
4.2 DHCP Client List
Use this table to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses. Click Status > Summary > DHCP Client List.
Figure 10 Status > Summary > DHCP Client List
The following table describes the labels in this screen.
Table 6 Status > Summary > DHCP Client List
LABEL
IP Address
MAC Address
Add
#
Status
Host Name
IP Address
MAC Address
Reserve
Apply
Reset
Refresh
You can also access this screen by clicking Network > LAN > Client List.
FSG2200HNU User's Guide
DESCRIPTION
Enter the IP address that you want to assign to the computer on your
LAN with the MAC address that you will also specify.
Enter the MAC address of a computer on your LAN.
Click Add to add a static DHCP entry.
This is the index number of the static IP table entry (row).
This field displays whether the client is connected to the ZyXEL Device.
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
The MAC (Media Access Control) or Ethernet address on a LAN (Local
Area Network) is unique to your computer (six pairs of hexadecimal
notation).
A network interface card such as an Ethernet adapter has a hardwired
address that is assigned at the factory. This address follows an industry
standard that ensures no other adapter has a similar address.
Select the check box in the heading row to automatically select all
check boxes or select the check box(es) in each entry to have the
ZyXEL Device always assign the selected entry(ies)'s IP address(es) to
the corresponding MAC address(es) (and host name(s)). You can select
up to 128 entries in this table.
Click this to save your changes back to the ZyXEL Device.
Click this to begin configuring this screen afresh.
Click this to reload the DHCP table.
Chapter 4 Status Screens
67
Advertisement
Table of Contents
