Table of Contents
Advertisement
Chapter 9 Voice
9.4 The Analog Phone Screen
Use this screen to control which SIP accounts and PSTN line each phone uses. To
access this screen, click VoIP > Phone > Analog Phone.
Figure 53 VoIP > Phone > Analog Phone
Each field is described in the following table.
Table 41 VoIP > Phone > Analog Phone
LABEL
Phone Port Selection
Phone Port
Selection
SIP Account to Make Outgoing Call
SIP Account
Association
SIP Number
SIP Account(s) to Receive Incoming Call
SIP Account
SIP Number
Apply
Cancel
144
DESCRIPTION
Select a phone port in the ZyXEL Device.
Select the SIP account you want to use when making outgoing calls
with the analog phone connected to this phone port.
Click this to go to a screen where you can configure the SIP number for
the SIP account.
Select a SIP account if you want to receive phone calls for the selected
SIP account on this phone port.
If you select more than one SIP account for incoming calls, there is no
way to distinguish between them when you receive phone calls. If you
do not select a source for incoming calls, you cannot receive any calls
on this phone port.
Click this to go to a screen where you can configure the SIP number for
the SIP account.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
FSG2200HNU User's Guide
Advertisement
Table of Contents
