Table of Contents
Advertisement
Chapter 5 WAN Setup
5.3 Default Gateway Screen
Use this screen to select a WAN interface through which you want to obtain a
system default server and DNS server. Click Network > WAN > Default
Gateway to open the following screen.
Figure 26 Network > WAN > Default Gateway I
The following table describes the labels in this screen.
Table 19 Network > WAN > Default Gateway
LABEL
WAN Interface
WAN Status
Apply
Cancel
5.4 Multicast Screen
Use this screen to select the WAN interface for multicast traffic. Multicast delivers
IP packets to just a group of hosts on the network. Refer to
Click Network > WAN > Multicast to open the following screen.
Figure 27 Network > WAN > Multicast
88
DESCRIPTION
Select the WAN interface from which the ZyXEL Device acquires it
gateway address and DNS server.
You can add or edit a WAN interface in
This shows whether the WAN interface is Up or Down.
Click this to save your changes back to the ZyXEL Device.
Click this to begin configuring this screen afresh.
Section 5.2 on page
76.
Multicast on page
FSG2200HNU User's Guide
91.
Advertisement
Table of Contents
