Table of Contents
Advertisement
Chapter 3 Tutorial
following figure shows an example of an ideal network setup for a company's
marketing division.
DHCP Server
Management PC
Video server
Vantage ACS
IP:
192.168.201.253
192.168.100.253
192.168.101.1
192.168.102.1
Enable DHCP relay to Server A
VLAD ID: 100
Queue Priority: 7
IP:
192.168.201.254
A quick summary of this network setup is as follows:
Connect the ZyXEL Device to the company's network switch, such as ZyXEL XGS-
1
4728F-1, that has port security, port isolation, IP source guard, ARP inspection
and DHCP snooping option 82 features turned on.
Connect the switch to the router provided and preconfigured by the Internet and
2
VoIP service provider (ISP). In the example above, DHCP relay to Server A is
enabled. The router also has an Access Control List (ACL) rule to tag VLAN ID 100
as 802.1P priority 7.
The router is connected to the service provider's: a) Server A, which serves as a
3
DHCP server and video server. It has ZyXEL's Vantage ACS installed which enables
it to manage the devices remotely; and b) SIP server that provides VoIP services.
Note: This tutorial only shows the configuration steps for the ZyXEL Device
38
Server A
SIP Server
IP:
192.168.201.252
10G
150 M
Port security On
Port isolation On
IP source guard On
ARP inspection On
DHCP snooping option 82
Egress rate = 150 M
IP:
192.168.100.253
192.168.100.253
192.168.101.0
192.168.102.0
192.168.103.0
NAT On
Routing Mode On
Firewall On
Port Forwarding On
Wireless On
VoIP On
QoS On (150 M)
FSG2200HNU User's Guide
.
Advertisement
Table of Contents
