Pnp/Pci Configurations - Foxconn Bloodrage User Manual

PnP/PCI Configurations

Init Display First
Reset Configuration Data
Resources Controlled By
x IRQ Resources
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
** PCI Express Relative Items **
↑↓→←:Move Enter:Select
► Init Display First
This item is used to choose the initial display device which will be used first when your PC
starts up. Options are : [PCI Slot] and [PCIEx].
► Reset Configuration Data
This item is used to enable or disable the reset configuration data function.
► Resources Controlled By
This item is used to define the system resource control scheme. If all cards you use support
PnP, then select [Auto] and the BIOS will automatically distribute interruption resources. If
the PCI cards you installed need special IRQ resources, you will need to select [Manual] and
manually adjust interruption resources in the event of hardware conflicts.
► IRQ Resources
When "Resources Controlled By" is set to "Manual", this item is available. You can press the
<Enter> key, then manually set IRQ resources.
► INT Pin 1/2/3/4/5/6/7/8 Assignment
This item is used to assign IRQ resources for INT Pin 1/2/3/4/5/6/7/8. Default INT Pin
assignments can be found from the help menu.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
PCI Slot
PCI Slot
Disabled
Auto (ESCD)
Press Enter
Auto
Auto
Auto
Auto
Auto
10
Auto
4
+/-/PU/PD:Value F10:Save
F5:Previous Values
43
Item Help
Menu Level ►
ESC:Exit F1:General Help
F7:Optimized Defaults