Foxconn Bloodrage User Manual page 57

Memory Timing Config
******** Memory Controller Setting ********
Memory Parameter Setting
x Memory Control Setting
x Channel Interleave Setting
x Rank Interleave Setting
↑↓→←:Move Enter:Select
► Memory Parameter Setting
This item is used to enable or disable memory parameter settings.
► Memory Control Setting
Options are: Channel for Original, Channel for Mirror, Channel for Lock, Channel for Spare.
► Channel Interleave Setting
This item is used to set Max. DRAM channel interleave. Options are: from 1 way to 6 way.
► Rank Interleave Setting
Interleaving allows banks of SDRAM to alternate their refresh and access cycles. One
bank will undergo its refresh cycle while another is being accessed. This improves memory
performance by masking the refresh cycles of each memory bank.
However, bank interleaving only works if the addresses requested consecutively are not in the
same bank. Option are: 1 way, 2 way and 4 way.
Phoenix - AwardBIOS CMOS Setup Utility
Memory Timing Config
Disabled Disabled
Channel for Original
6 way
4 way
+/-/PU/PD:Value F10:Save
F5:Previous Values
50
Item Help
Menu Level ►
ESC:Exit F1:General Help
F7:Optimized Defaults