Foxconn Bloodrage User Manual page 119

2. Copy section 5-2, BIOS Configuration.
Shut down the computer, connect SATA hard disks to SATA ports, power on
computer again.
Press <Del> key, get into BIOS, set "SATA Mode" to [RAID], press <F10> to save
and exit BIOS. PC will reboot.
SATA Mode
Legacy Mode Support
x Turbo Memory Support
OnBoard IDE and eSATA Chip
OnBoard SAS Chip
↑↓→←:Move Enter:Select
3. Copy section 5-3, Create RAID in BIOS.
Press <CTRL><I> simultaneously to get into RAID BIOS set up (Intel
Storage Manager option ROM utility).
Configure your new hard disks to RAID0, 1, 5 or 10. Exit RAID BIOS. PC will reboot.
4. The Windows XP is running again and a new hardware of RAID disk was found.
Click [Cancel] to skip this Wizard.
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
RAID RAID
Disabled
Disabled
IDE Mode
Enabled
+/-/PU/PD:Value F10:Save
F5:Previous Values
112
Item Help
Menu Level ►
ESC:Exit F1:General Help
F7:Optimized Defaults
®
Matrix
Click to exit.