Back Panel Connectors - Foxconn Bloodrage User Manual

1-3 Back Panel Connectors

PS/2 Keyboard Port
1
3
2
USB Ports
1. Ps/2 Keyboard Port
Use the lower port (purple) to connect a PS/2 keyboard.
2. UsB Ports
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as an
USB keyboard/mouse, USB printer, USB flash drive and etc.
3. Clear CMos Button
Onboard Clear CMOS button is located directly on the motherboard PCB, so you can easily clear
CMOS after failed overclocking attempts.
!
■ Make sure the power supply is turned off before pressing the CLR_CMOS button to
clear CMOS.
■ Push down the CLR_CMOS button and hold it there for a couple of seconds to clear
the CMOS completely, then release.
4. Coaxial s/PDIf out Connector
This connector provides digital audio out to an external audio system that supports digital coaxial
audio. Before using this feature, ensure that your audio system provides a coaxial digital audio in
connector.
1394a Port
5
Clear CMOS
Button
4
Coaxial
S/PDIF Out
LAN Ports
7
2
USB Ports External SATA
Ports
6
Line In
Line Out
Microphone
Subwoofer
Rear Speaker
Side Speaker
6 8
Audio Ports