Foxconn Bloodrage User Manual page 94

8. In "Create Volume" item, press <Enter>.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH10R wRAID5 Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
A warning message will appear :
9. Press <Y> to create the volume and return to the main menu, a 200GB RAID0 system
is normally configured.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH10R wRAID5
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID Name
0 TryRAID0
Physical Disks:
Port Drive Model
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB
2 Maxtor 6L250S0
4 ST3320620SV
5 ST3300831AS
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Press ENTER to create the specified volume.
[↑↓]-Change [TAB]-Next
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
[ DISK/VOLUME INFORMATION
Level
RAID0(Stripe)
Serial #
L50SKP4G
9QF4YJGQ
3NF02XH2
[↑↓]-Select
]
TryRAID0
RAID0(Stripe)
Select Disks
128KB
200 GB
Create Volume
Create Volume
[ HELP ]
[ESC]-Previous Menu
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
]
Stripe Size
128KB 200.0GB
Size
232.9GB
298.1GB
279.5GB
[ESC]-Exit [ENTER]-Select Menu
87
[ENTER]-Select
Status Bootable
Normal Yes
Type/Status(Vol ID)
Member Disk(0)
Member Disk(0)
Non-RAID Disk
Non-RAID Disk