Foxconn Bloodrage User Manual page 24

8-pin ATX 12 V Power Connector : PWR1
The 8-pin ATX 12V power supply connects to PWR1 and provides power to the CPU.
!
We recommend you using an 8-pin ATX 12V power supply. If
you are using a 4-pin power supply, you need to align the ATX
power connector according to the picture on the right.
floppy Disk Drive Connector : floPPY1
This motherboard includes a standard floppy disk
drive(FDD) connector, supporting 360KB, 720KB,
1.2MB, 1.44MB, and 2.88MB FDDs.
IDe Connector : PIDe1
With the provided Ultra DMA IDE ribbon cable, you
can connect to any IDE type of hard disk and CD/
DVD ROM/RW drive.
5 1
+12V GND
8 4
PWR1
17
Pin # Definition Pin #
1 GND 5
2 GND 6
3 GND 7
4 GND 8
Connect a 4-pin
power plug
Definition
+12V
+12V
+12V
+12V